Professional Electrical Wiring Services in Dubai
Electrical wiring is not a job where close enough is acceptable. A circuit with undersized cable, a connection made without proper earthing, or a panel that was not load-balanced correctly does not fail loudly or immediately. It degrades quietly — until it trips a breaker, overheats an appliance, or creates a fire risk inside a wall where no one can see it. Fix On A Click carries out electrical wiring and rewiring across all of Dubai, covering residential villas and apartments, commercial offices, retail units, and light industrial properties.
Our licensed electricians assess your existing system, design the circuit layout based on actual load requirements, and install wiring that meets Dubai Municipality and DEWA standards. Whether you are wiring a new build, rewiring a property that has not been updated since the 1990s, or adding circuits for new equipment — air conditioning systems, EV chargers, commercial kitchens, or server rooms — we do the job correctly from the breaker panel to the final outlet.
What Electrical Wiring Actually Involves
Running cables through walls is the visible part of an electrical wiring job. The work that determines whether the system is safe and reliable happens before and after: load calculations to size circuits correctly, panel design to distribute circuits without overloading any single breaker, earthing and bonding to ensure fault current has a safe return path, and testing to confirm every circuit performs to specification before the walls are closed.
In Dubai, electrical installations must meet the requirements of DEWA and Dubai Municipality regulations. Most residential properties in the emirate were built to handle the appliance loads of the 1990s and early 2000s. A modern villa now regularly runs multiple split AC units, a central kitchen with multiple high-draw appliances, home automation systems, EV chargers, and home office equipment — often from a panel that was never designed for that load. We attended a villa in Springs last year where the owner was experiencing monthly breaker trips. The panel had 12 circuit breakers sharing the load that should have been distributed across 20. Rewiring the distribution was a two-day job. The alternative — continuing to trip breakers and run the system at its limits — damages appliances and creates a genuine fire risk over time.
Warning Signs
Your Wiring Needs Attention
Electrical problems rarely announce themselves loudly until they become serious. These are the signs that indicate wiring issues worth addressing before they escalate.
Frequently Tripping Breakers
A circuit breaker that trips once under unusual load is doing its job. One that trips regularly under normal usage is telling you the circuit is undersized for the current draw, or something on that circuit has a developing fault. Resetting the breaker without investigating the cause does not fix the underlying problem — it defers it until the next failure.
Flickering or Dimming Lights
Lights that dim or flicker when a large appliance starts — particularly when the AC compressor or washing machine motor kicks in — indicate a voltage drop on that circuit. This points to a connection resistance problem, an undersized supply cable, or a shared circuit that should have been dedicated. Persistent flickering in the absence of large loads is a loose connection somewhere in the circuit.
Warm Outlets or Switch Plates
A socket or switch plate that is noticeably warm to the touch is carrying more current than its wiring or connections are rated for, or has a loose connection generating heat at the junction point. Both conditions create a fire risk. Discolouration or scorching around an outlet face is a sign the problem is already advanced and needs immediate attention.
Buzzing from Outlets or Panels
Electrical wiring that is functioning correctly is silent. A buzzing or humming sound from outlets, switch boxes, or the distribution panel indicates arcing inside a connection or a failing component. Arcing inside a wall or panel generates heat that can ignite surrounding material. This is one of the warning signs that should not be left to diagnose at a later convenient time.
Burning Smell Near Wiring
A burning or acrid plastic smell near an outlet, switch, or the distribution panel is a serious sign. Cable insulation that overheats gives off this smell before it begins to melt. Once insulation damage reaches this stage, the cable needs to be replaced — not just the socket it feeds. The source of the heat causing the damage also needs to be identified and corrected.
Two-Pin Outlets Throughout
Two-pin ungrounded outlets are not compliant with current UAE electrical standards. Modern appliances, particularly those with metal casings and electronics, require a grounded earth connection for safe operation. Using adapters to fit three-pin plugs into two-pin sockets does not provide earthing — it bypasses the requirement entirely. Rewiring these circuits with a proper earth conductor is the only correct solution.
Sparks When Plugging In
A very brief spark when first connecting an appliance to a socket is a normal capacitive discharge and is not concerning. Visible sparks, sparks accompanied by a sound, or sparks that appear on disconnection rather than connection indicate a failing socket contact or a wiring fault at that outlet. Continued use of a sparking outlet risks igniting nearby material or damaging the appliance connected to it.
Wiring More Than 20 Years Old
Most residential electrical installations in Dubai from before 2005 were designed for significantly lower power demands than a modern household places on them. Cable insulation also has a finite service life — typically 25 to 40 years depending on ambient temperature. Properties that have never had a full electrical assessment since original construction should be evaluated before adding new high-draw equipment or carrying out a renovation.
Electrical Wiring Services We Provide
From a single new circuit for a home office to a complete rewire of a 6-bedroom villa, or a commercial fit-out requiring structured electrical design across multiple zones — Fix On A Click carries out electrical wiring work across the full range of residential and commercial requirements in Dubai.
Residential New Wiring
Complete electrical wiring for new villas and apartments. Circuit design, panel installation, outlet and switch placement, earthing system, and final testing to DEWA and Dubai Municipality standards before handover.
Full Rewiring
Complete replacement of the electrical wiring system in an existing property. Old cables removed, new cables pulled through existing conduit where possible or re-routed via new trunking, updated panel installed, all circuits tested and documented on completion.
Additional Circuits
Adding new dedicated circuits to an existing panel for new equipment: AC units, EV chargers, dishwashers, washing machines, home theatre setups, or additional office workstations. Includes load assessment to confirm the existing panel has capacity before work begins.
Distribution Panel Upgrades
Replacement of undersized or outdated distribution boards with appropriately rated panels. RCD protection, correct breaker sizing per circuit, properly labelled breakers, and earthing terminal verification. A correctly designed panel is the foundation of a safe electrical system.
Commercial Electrical Wiring
Office fit-outs, retail units, restaurants, hotels, and light industrial properties. Structured circuit design, three-phase supply connections where required, equipment-specific dedicated circuits, and emergency lighting. We work around operational schedules to minimise downtime.
How It Works
Our Electrical Wiring Process
Every wiring job follows a structured process from assessment through to full system testing. No installation is signed off without every circuit being confirmed against specification.
Contact & Scope
Call or WhatsApp with your property type, what work is needed, and any specific requirements. We gather enough detail to assess the job scope and arrive prepared for the site visit.
Electrical Assessment
We inspect the existing system: panel condition, breaker ratings, circuit layout, earthing quality, and cable condition where accessible. Load calculations are run to confirm what the installation needs to support, now and with planned additions.
Design & Quote
Circuit layout is designed to match the load requirements, outlet positions, and panel capacity. A full, itemised cost is provided before any work begins. What is agreed is what is charged.
Installation
Cables are pulled, connected, and secured. Panel wiring, breaker installation, earthing, and outlet work follow a methodical sequence. Walls and ceilings are disturbed only where required and made good on completion.
Testing
Every circuit is tested for continuity, insulation resistance, polarity, and earth loop impedance. RCDs are tested for trip time. No circuit is energised for client use until it has passed testing against specification.
Handover
You receive a complete rundown of the installation: circuit layout, panel labelling, and what each breaker covers. Recommendations for any future additions or observations from the assessment are provided clearly.
6 Solid Reasons
To Choose Fix On A Click
Dubai homeowners and businesses choose Fix On A Click for electrical wiring because the job is designed, installed, and tested correctly — not just completed quickly.
Load Assessment Before Design
Every wiring project starts with a load calculation. Circuit sizes, cable ratings, and panel capacity are determined by the actual power demands of the equipment being connected — not by a standard template. Undersized circuits cost more to fix later than to size correctly from the start.
Full Circuit Testing on Completion
Every circuit is tested for continuity, insulation resistance, correct polarity, and earth loop impedance before the installation is handed over. RCDs are tested for trip time. This is not optional — it is the standard we apply to every job regardless of size.
DEWA and Code Compliant
All wiring is installed to meet DEWA and Dubai Municipality electrical standards. Cable specifications, earthing requirements, RCD protection, and panel labelling all conform to the applicable regulations. This matters for property insurance, building approvals, and resale.
Transparent, Fixed Pricing
You receive a full, itemised cost after the site assessment and before any work begins. The price covers assessment, materials, labour, and testing. Nothing is added after the job is done. What is agreed on site is what is charged.
Future-Proofed Installations
Panel capacity, cable routing, and circuit design are planned with future additions in mind. When you add an EV charger, a new AC unit, or a home automation system in two years, the infrastructure supports it without requiring a full rework of what was just installed.
All Dubai Areas Covered
We work across every area of Dubai: Downtown, Marina, JBR, Palm Jumeirah, JVC, Arabian Ranches, Al Barsha, Business Bay, Silicon Oasis, Mirdif, and all surrounding communities. Visits are scheduled within 24 to 48 hours of first contact, seven days a week.
Frequently Asked
Questions About Electrical Wiring
Direct answers to what Dubai homeowners and businesses ask most about electrical wiring and rewiring.
How much does electrical wiring cost in Dubai?
Electrical wiring services start from AED 300. The final cost depends on the scope of work: a single additional circuit is priced differently from a full rewire of a villa. Cost is confirmed on site after the electrician has assessed the existing system, determined what the installation needs, and designed the circuit layout. Call or WhatsApp us with the property type and what you need and we will give you an indicative range before the visit.
How do I know if my property needs rewiring?
The clearest indicators are frequently tripping breakers, lights that flicker or dim when appliances start, outlets or switch plates that feel warm, buzzing sounds from switches or the panel, burning smells near electrical fittings, or visible sparks. Older properties that have never had an electrical assessment — particularly those built before 2005 — should be evaluated before adding new high-draw equipment. An assessment confirms whether a full rewire is needed or whether targeted circuit additions resolve the issue.
How long does electrical rewiring take?
A single additional circuit takes 2 to 4 hours. A distribution panel upgrade takes a full day. A partial rewire covering specific circuits in a villa takes 1 to 3 days depending on the scope. A complete rewire of a 3 to 4 bedroom villa typically takes 3 to 5 days. These timelines include the assessment, installation, and circuit testing. We give a specific timeline estimate once the scope is confirmed on site.
Can you add a circuit for an EV charger or new AC unit?
Yes. Adding a dedicated circuit for an EV charger, a new split AC unit, a pool pump, or any other high-draw appliance is a standard job. The first step is checking whether the existing distribution panel has the spare capacity for an additional breaker. If it does, the new circuit is added directly. If the panel is already at capacity, a panel upgrade or sub-panel installation is required before the new circuit can be added safely. We assess this on site before quoting.
What does circuit testing actually check?
A full circuit test checks continuity (that the circuit is complete and uninterrupted), insulation resistance (that the cable insulation has not degraded and is not allowing current to leak), polarity (that live, neutral, and earth connections are in the correct terminals throughout the circuit), and earth loop impedance (that the earthing path has low enough resistance to allow a breaker to trip quickly under a fault condition). RCDs are tested separately for trip time under a fault current. These tests confirm the installation is safe to use and will respond correctly in a fault condition.
Is it safe to stay in the property during rewiring?
For most rewiring jobs in occupied residential properties, work is phased room by room so that residents can continue using the property with temporary disruption to each area. There will be periods without power in the room being worked on. For a complete rewire, there may be one or two periods of full property isolation lasting a few hours while the panel is disconnected and reconnected. We schedule these periods in advance and keep them as short as possible. The specific arrangement is discussed and agreed before work begins.
How do I arrange an electrical wiring visit in Dubai?
Call or WhatsApp Fix On A Click on +971 52 271 5566. Describe the property type, what work you need, and any symptoms you have been experiencing. We give you an indicative cost range and schedule a visit at a time that suits you. The confirmed cost is provided after the on-site assessment. We cover every area of Dubai and book within 24 to 48 hours of first contact, seven days a week.
Book Your Electrical Wiring Assessment Today
Whether you are experiencing warning signs in an existing system, adding new equipment that needs a dedicated circuit, planning a renovation, or wiring a new property — call or WhatsApp Fix On A Click. Describe the property and what you need. We arrange a licensed electrician visit at a time that suits you, seven days a week across all of Dubai.
We serve Downtown Dubai, Dubai Marina, JBR, Palm Jumeirah, JVC, Al Barsha, Business Bay, Jumeirah, DIFC, Mirdif, Deira, Bur Dubai, Arabian Ranches, Al Quoz, Dubai Hills, Silicon Oasis, and every other community and development across the emirate.
Electrical Wiring Across All of Dubai
Don't see your area? We cover every corner of Dubai — call us and we will come to you.