Professional Brick Matching & Replacement
A cracked or flaking brick does more than ruin the look of your wall—it compromises the structure and lets moisture inside. But replacing it isn't as simple as sliding a new block in. If the color, texture, or mortar doesn't match perfectly, the repair will stand out like a sore thumb.
Fix On Click specializes in seamless brick matching and replacement across Dubai. We source exact replica bricks, carefully extract the damaged ones without harming the surrounding wall, and lock them in place with color-matched mortar.


The Fix On Click Masonry Advantage
Dubai's coastal air brings high salinity and harsh heat. Over time, moisture gets into the brick face, crystallizes, and forces the face of the brick to pop off. This is called spalling. Once a brick starts flaking, it cannot be patched—it must be entirely replaced to protect the home's structure.
Our masonry team does not just pick a random red brick from the hardware store. We utilize a vast network of suppliers to source bricks that match the exact tone, size, and texture of your existing wall. We factor in the aging and weathering of your property to ensure a truly invisible fix.
From single damaged units to rebuilding heavily water-damaged sections of your boundary wall, we restore both the visual charm and the structural safety of your brickwork.
Warning Signs
Your Bricks Are Failing
A damaged brick is more than a cosmetic issue. Look out for these signs of structural deterioration.
Flaking Faces (Spalling)
If the front layer of the brick is popping off or crumbling away, water has penetrated the core.
Deep Cracks
Vertical or jagged cracks running straight through the brick itself indicate serious foundation movement.
Loose Bricks
If you can wiggle a brick by hand, the surrounding mortar has failed, compromising the wall's strength.
Interior Dampness
Water stains or damp patches on the inside of your home often point to a shattered exterior brick.
White Powder Stains
Thick white salt deposits (efflorescence) pushing out of the brick face signal severe internal moisture.
Impact Damage
Chips or crushed sections caused by vehicle bumps, falling branches, or heavy equipment.
Pest Entry Points
Missing chunks of brickwork create easy doorways for rodents and insects to enter your wall cavity.
Bulging Wall Sections
If a section of the brickwork appears to be bowing outward, the bricks behind are detached and pushing forward.
Why Replacing a Single Brick is So Difficult
If you smash out a broken brick with a heavy hammer, you will almost certainly crack the healthy bricks surrounding it. Furthermore, simply buying a new red brick from a store looks terrible next to older bricks that have weathered and faded in the sun over ten years.
Fix On Click brings finesse to masonry. We carefully drill and grind away the old mortar to release the damaged brick cleanly. Then, our sourcing experts find or tint a replacement brick to match your wall's specific age, texture, and color. Finally, we set it with mortar that perfectly mirrors the surrounding joints.
Damage-Free Extraction
We use precision grinders to carve out the mortar without cracking the surrounding wall.
Flawless Matching
We hunt down exact replicas or tint replacements to match the unique weathering of your property.
Mortar Tinting
A new brick looks obvious if the cement is bright gray. We tint the mortar to match the aged joints.
Structural Sealing
We ensure the new brick is packed tightly, preventing future water ingress and expanding the wall's life.
How We Work
Our Replacement Process
A meticulous method to ensure a truly invisible and highly structural repair.
Assessment & Sourcing
We analyze your wall's brick type and source an exact color and texture match.
Safe Extraction
We grind away the surrounding mortar and carefully pull out the damaged brick.
Cavity Prep
We clean out dust, old cement, and loose debris from the empty hole.
Mortar Mixing
We mix fresh cement, adding specific dyes to perfectly match your existing joints.
Brick Placement
We bed the new brick into the mortar, ensuring it sits flush with the rest of the wall.
Pointing & Cleanup
We shape the visible joints to match the original style and clean the wall face.
Brick Replacement Pricing
Clear, transparent quotes covering extraction, custom brick sourcing, and seamless installation.
We provide an exact quote after surveying the damage and sourcing the matching bricks.
Single Brick Replacement
Removing and replacing 1 to 5 badly damaged or spalled bricks
Custom Brick Sourcing
Hunting down exact matches for vintage or discontinued brick styles
Wall Section Rebuilding
Dismantling and rebuilding a bulging or heavily water-damaged section
Tuckpointing Integration
Replacing bad bricks and repointing the entire surrounding mortar
📌 Note: Pricing depends heavily on the rarity of your current bricks. If the bricks are no longer manufactured, we may need to tint existing blocks to match. Contact us for a free site assessment.
What Ruins Bricks
Over Time?
In Dubai, the biggest enemy of a brick wall isn't always impact—it's moisture and salt. When coastal humidity or garden sprinklers soak into the porous brick, the water naturally evaporates in the intense summer heat. However, it leaves behind salt crystals inside the brick. As these crystals expand, they literally blow the face off the brick, a process called spalling.
Poor original construction also plays a major role. If the mortar used was too hard (containing too much Portland cement), the natural expansion of the wall will crack the softer bricks rather than the joints.
Fix On Click understands these unique challenges. We replace the spalled bricks with robust, matched units and ensure the new mortar is flexible enough to handle the thermal expansion of Dubai's climate.
Moisture Entry
Salt Crystals
Spalling
Thermal Shock
Hard Mortar
Why Dubai Trusts Fix On Click
Expert masonry combined with a vast sourcing network to keep your property looking perfect.
Master Masons
Our team knows exactly how to remove shattered bricks without weakening the rest of the wall.
Exact Color Match
We take the time to find or tint bricks and mortar so the repair is completely invisible.
Clean Work
We cover the surrounding area and vacuum up all heavy masonry dust before we leave.
Fast Sourcing
We utilize a strong network of Dubai suppliers to find the exact brick style you need quickly.
Strong Mortar
We use the correct ratio of cement and sand to ensure the wall can handle thermal expansion.
Upfront Costs
You will always know the final price for labor and materials before we start cutting.
Related Services
Complete Masonry Care
If your walls need attention, our handyman team can help with all exterior and interior repairs.
Tuckpointing
Grinding out old, crumbly mortar and repointing the wall with strong fresh cement.
Wall Plastering
Smoothing over damaged concrete walls and fixing deep cracks flawlessly.
Exterior Painting
Applying heavy-duty, weather-resistant paint to protect your villa's outside walls.
General Masonry
Building small retaining walls, fixing patio blocks, and repairing garden paths.
Frequently Asked
Questions About Brick Repair
Simple answers to help you prepare for your masonry restoration.
Can you match really old or weathered bricks?
Yes. If the exact brick is no longer manufactured, we source the closest possible match in size and texture. We can then use specialized masonry tints to weather the new brick so it blends perfectly with the surrounding wall.
Why do the faces of my bricks keep flaking off?
This is known as spalling. It happens when moisture gets trapped inside the brick. The water brings natural salts to the surface, and as it evaporates in the heat, the expanding crystals pop the face of the brick off.
Can you fix just one single broken brick?
Yes. We use precise grinders to cut the mortar around the single damaged brick, slide it out without disturbing its neighbors, and slide a new one into its place.
Will the new mortar match the old gray mortar?
Yes. Fresh mortar is usually bright and obvious. We mix custom dyes and sand into our cement so that the new joints match the aged, weathered look of the existing wall exactly.
Do I need to buy the replacement bricks myself?
No, you don't need to do anything. Once we assess your wall, our sourcing team will find the correct replacement bricks from our network of suppliers.
How long does the replacement take?
For a few isolated bricks, the job takes a few hours. If a large section of the wall is bulging and needs to be rebuilt, it may take 1 to 2 days to ensure proper structural safety.

Restore Your Wall Seamlessly Today
Don't let a few broken or flaking bricks ruin the value and structural safety of your property. Our master masons will extract the damage and blend a perfectly matched replacement directly into the wall.
Reach out to Fix On Click today. Send us a picture of the damaged wall via WhatsApp, and we will schedule a free site assessment to get your brickwork looking perfect again.
Masonry Services Across All of Dubai
Don't see your neighborhood listed? We cover every corner of Dubai — contact us and our mason will come directly to you.

