Pricing depends on pipe length, property type, material, and complexity. Gas piping runs from AED 80 to AED 100 per metre depending on the specification. A single appliance connection is AED 150. A basic apartment or studio new gas line starts from AED 1,000 and a full villa or commercial system from AED 2,500. An accurate cost requires a site inspection — we assess the full layout before confirming the price, and no work starts until you have approved it.

For commercial properties, restaurants, and new builds, Civil Defense approval is required before the installation can be commissioned and before a completion certificate is issued. For like-for-like residential appliance replacements in existing properties, the requirements differ. We advise on the specific compliance requirements for your property type and project scope during the site assessment, and we manage the approval documentation where it is required.

The most common material for indoor residential gas lines in Dubai is copper, which is suitable for low-pressure natural gas and LPG distribution. Black steel is used for higher-pressure systems and commercial installations where mechanical strength is required. Corrugated stainless steel tubing (CSST) is used in applications where flexibility is needed to navigate around structural obstacles. The correct material is specified based on the operating pressure, environment, and application during the design phase.

A single appliance connection in an existing apartment typically takes 2 to 3 hours. A new gas line for a studio or small apartment is usually one working day. A full villa installation covering multiple appliance points across floors typically takes 2 to 3 days. Commercial projects depend on the size and complexity of the distribution network. We give a specific timeline after the site assessment and plan the work to minimise disruption to the property's occupants.

Once the pipework is fully installed and all connections are made, the system is sealed at both ends and pressurised to above its intended operating pressure using compressed air or an inert gas — not the actual gas supply. The pressure is read on a calibrated gauge and the system is held at that pressure for a set hold period. If the gauge reading drops during the hold period, there is a leak somewhere in the system that must be located and corrected before the test is repeated. We do not connect the gas supply until the system passes with no pressure drop across the full hold period.

Yes. Outdoor gas connections for BBQ grills, outdoor kitchen ranges, and patio heaters are a common request for Dubai villas. The supply line typically runs from the indoor gas network through the wall or under the floor slab to an external connection point with an isolation valve. The material specification for outdoor runs accounts for UV exposure and temperature cycling, which rules out standard indoor-grade copper in certain configurations. We assess the routing and specify the correct solution for the outdoor environment.

Yes. Commercial kitchen gas installations require more complex load calculations, larger supply line sizing, and more rigorous Civil Defense documentation than residential work. We coordinate with kitchen designers and fit-out contractors, calculate the combined BTU load for all planned appliances, size the supply line to handle simultaneous operation, and install the required zonal isolation valves and pressure regulators. We manage the Civil Defense approval process and provide full documentation for the building inspection.

Call or WhatsApp Fix On Click on +971 52 271 5566. Tell us the property type, the intended appliances or scope of work, and the location. We arrange a site assessment at a time that suits you — seven days a week. The assessment identifies the routing, material specification, compliance requirements, and confirms the full cost before any work begins. We cover every area of Dubai for both residential and commercial gas pipe installation.